Customer Helpline
1300 889 028
11
Assembly
1. ASSEMBLING AND REMOVING THE BLOWER TUBE (SEE FIG. A1-A4)
- Assembling
Before assembling the blower tube, be sure the on/off switch is in ‘’O’’ off position.
Fit the blower tube to the motor housing as shown in Fig. A1. Check the blower tube is
firmly secured. Fix the blower tube to the blower port with the screw provided.
WARNING: Do not attempt to operate or disable the on/off switch by any means
other than the normal assembly or removal of the tube.
- Removing
Before disassembling the blower tube, be sure the on/off switch is in ‘’O’’ Off position.
First loosen the screw, as shown in Fig. A3. Press the tube release button, so that you
can separate the tube (See Fig. A4). Do not try to separate the tubes by force or by using
tools.
2
1
2
1
1
2
7
A1
A2
A4
A3
A5
A6
A7
B
C
D
E