GENERAL INFORMATION
1.
The Model VL-Channel is designed to lift and transfer angles and bulb
pro
fi
les for fabrication and erection of steel.
2.
Always choose the proper clamp and rated capacity for the material to
be
lifted.
3.
The Model VL-Channel may be used to lift material from a vertical
position (Fig. 1) or from horizontal to vertical to horizontal through
a 180° arc (Fig. 2).
4.
The Model VL-Channel is rated to lift material with a hardness up to
450 Brinell (48 Rockwell C).
5.
Do not use the Model VL-Channel to lift plate steel.
6.
The Model VL-Channel has a locking handle that locks the clamp open
to facilitate loading and unloading, and locks the clamp closed onto the
material for a more secure lift. Always store the clamp in the locked
open
position.
7.
The locking handle also has a remote release design and, when
needed, the operator can attach a tag line and safely lock the clamp
open from a distance once the load has been securely positioned and
the weight of the load is removed from the clamp.
8.
The operator must read and understand the Operator’s Manual before
using a Safety Clamp.
Safety Clamps, Inc.
Model VL-Channel
1
Serial #
_______________________
Model
_______________________
Max. Rated
Capacity in Tons
_______________________
Jaw Opening
_______________________
Safety Clamps, Inc.
Repair Service Center
Call 1-800-456-2809 for a Return Authorization
Ν
umber.
Include:
Model
Rated
Capacity
Serial
Number
You will receive a written quote within 24 hours of receipt of your
Safety Clamp.
Your Safety Clamp will be repaired, tested, re-certi
fi
ed, painted, and
shipped within 24 hours of authorization.
We also perform periodic inspections and re-certi
fi
cations.
It’s that easy! Call 1-800-456-2809 for more details.
Register Your Clamp
Go to www.safetyclamps.com to register your clamp to receive the most
appropriate service and product support for your clamp and new product
updates as they come available.
10 Year Limited Warranty
All products manufactured by Safety Clamps, Inc. carry a limited warranty
that the product is free from defects in materials and workmanship. This
warranty applies only to the original end user of the clamp and is valid for 10
years from the date of purchase.
Conditions
This warranty only covers defects in materials and workmanship and only if
the clamp has been inspected, maintained, and operated within the
guidelines of the clamp’s Operation, Maintenance, and Repair Manual. The
warranty does not cover wear to parts such as pins, grippers, lock springs,
etc. If a defect is found within the warranty period, the clamp will be repaired
or replaced by determination of the manufacturer.
No warranty is given due to:
regular wear; incorrect use; overload;
modi
fi
cation of the clamp; improper maintenance and/or repair.
Figure 1
Figure 2
