15
Meter displays VOLTAGE WARNING regardless of AUTO or MANUAL measurement. When
over the Maximum Measurement limit, the WARNING sound starts. At this case, immediately
remove Test Lead/Test Probe from the Meter.
When measurement range set manually. If the measurement exceeds the range, the display
will show
“OL”.
Power
6*AA Alkaline Battery (
SBS-600
only )
7.2V NiMH Battery Pack or AC Power Adapter (
SBS-700
only )
Remaining Battery Capacity Level indicator
Top right display indicates Remaining Battery Capacity Level,
Level
Remaining Battery
Fully Charged.
(100%)
3/4 charged
(75 %)
1/2 charged
(50 %)
1/4 charged
(25 %)
Depleted
( 0 %)
Auto Power Off
During operation the unit will automatically power off after 15 minutes without a button push.
User can select the Auto Power Off time (min 5 minutes ~ max 2 hours or Auto Power Off
mode).
[NOTE]
Auto Power Off mode is not active in DATA LOGGER mode (MIN MAX, PEAK mode in
operation)
Auto Power Off mode is not active when the Meter is powered by ADC Power Adaptor
(
SBS-700 only
)
Battery Save Mode
Auto Power Off mode is not activated during Data Logger or Auto Hold mode of operation. If
no key is pressed on Meter for a certain time, Meter automatically changes to Battery Save
Mode. Mode Change time is equal to Auto Power Off mode time setting.
All Power off including Display, except present measurement function.
Exit the Battery Save Mode by
- Pressing any key
- change measurement range
- start PC Interface communication.
Meter function and Operation Mode is not changed
