13
IndustryPack I/O Pin Assignments
The six IndustryPack positions are referred to as slots and identified by the letters A, B,
C, D, E, and F. Each slot's I/O connections are routed to a separate 50-pin IDC
connector which allows the separate ribbon cables to be brought out through the rear
panel. Refer to the
I/O Wiring
section for more information.
Power
The PCI-60A provides protected and fi5V, +12V, and -12V supplies to each
IndustryPack by means of passive "T" filters, capacitors, and fuses. The three terminal
filters provide excellent RF rejection of power supply conducted noise. This permits use
of precision analog IndustryPacks together with high-speed digital IndustryPacks in the
same PCI-60A. The IndustryPack slots feature other power handling features such as
separated ground planes to reduce conducted noise. For more information, refer to the
Fuse Chart depicted Figure 7 in the
Other Features
section of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
