SBose DVD-4008, Руководство пользователя

Страница: 23 / 26

MP3/MPEG4 DISC PLAYBACK
Insert an MP3/MPEG4 disc into the player; a content menu will display on the screen.
MENU OPERATION :
Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the selected folder or play the
selected file. You can also use the digit keys to make selection of a folder to enter or a file to play.
In the content menu, press [ ] to return to the upper menu; press [ ]/[ ] to return/proceed to the previous/next
the menu page.
[PROG]: Press repeatedly to switch between FOLDER playback mode and FILELIST playback mode in the content
menu.
[MENU]: During playback of an MPEG4 disc, press to return to the content menu.
NOTE : During playback, [ ], [ ], [ ], [ ](press to stop the playback), [REPEAT], [A-B], [/-], [MUTE], etc.
are valid. Please refer to the
REMOTE CONTROL FUNCTION
chapter for details.
-22-
USB DRIVE AND MEMORY CARD PLAYBACK
Basic Playback
Insert a USB drive into the USB slot. Press [USB] to enter the connected USB drive. Press it again to return to the
DVD mode.
Insert an SD, MS or MMC card into the memory card slot. Press [USB] to access the connected memory card.
Press it again to return to the DVD mode.
NOTE :
In case the player breaks down when you insert a USB drive or a memory card into the player, turn off the player,
disconnect the power cord from the AC outlet and unplug the USB drive or/and the memory card from the player.
Then, power on the player again. The player will resume the normal status.
The connected USB drive or the memory card is probably not a certified one. The player cannot play any
uncertified USB drive and memory card.
If there is no disc in the disc tray, the player will switch to the corresponding mode automatically after you plug in
a USB drive or a memory card.
If a USB drive and a memory card are inserted in the player at the same time, press [USB] once to select USB and
press it twice to select the memory card. Press it for the third time to return to the DVD mode.
For playback operation, please refer to
MP3/MPEG4 DISC PLAYBACK
in this chapter.
During the playback of picture files, you need to press [MENU] or open the disc tray before switching between
DVD mode, USB mode and CARD mode.