18
Grand Total
When SB1000 /SB-1100 starts printing counting result, the value, which is displayed as T$ on
LCD, is added to the grand total automatically. Then the display will show the total amount of the
grand total. Even though a printer is not connected, this operation will be done because SB1000
/SB-1100 does not check whether a printer is connected or not.
The grand total is managed separately in MIXED and SINGL mode, namely there are two grand
totals. You can see only one grand total at a time: for example in SINGL mode the display will show
only grand total for SINGL.
If you want to just see the grand total without adding a value then press GT key and the display will
be changed like below pictures every time when GT key is pressed. Only in this display mode the
operator can clear grand total by pressing CLEAR key. If the grand total is cleared, the printing
sequence number is automatically reset to “1”.
To exit from the grand total display mode, just press DISPLAY or just start another counting job.
Grand Total View
Summary of the Reject Reasons
NO I.D.
: The machine failed to identify the denomination.
NO READ
: The note was not successfully read.
OVERRUN
: The next note was fed too close to the first note.
SUSPECT
: The note was suspected to be a counterfeit.
STAY NOTE
: The note was not fit to the condition of sorting.
DOUBLE : More than two pieces of notes were fed into machine
CHAIN
: Chain Error
HALF
: Half Error
CAUTION
If the reject reason is Chain or Half, the number of the reject note displayed on
LCD can be different with the actual number of notes in the reject pocket.
