3
INSTALLATION INSTRUCTIONS
STEP 1: BEFORE GOING ON THE ROOF
Check that all parts are present
•
Damper assembly: damper, cable, cable
spring
•
Adhesive tube (1)
•
Allen wrench (1)
•
Bracket (1)
•
Chain assembly: chain, brass lug, handle (1)
•
Nail anchors (2)
If any parts are missing, call SBI Heating Accessories:
418-908-8002
STEP 2: ON THE ROOF
A. Carry damper and adhesive to roof
B. Prep flue liner and damper
•
Make certain top of flue liner is dry and clean.
•
Install damper on flue so that high side of damper
is against prevailing (most frequent) wind (see
illustration).
•
Be certain 4 inch spring will hang freely from lid
when damper is closed.
•
Lower unattached end of cable to fireplace
opening below.
C. Adhere damper to the flue liner
•
Use the adhesive cap to open the tube.
•
Apply adhesive to top of flue liner all the way
around the opening.
Important: Use only the adhesive furnished.
Caution: Direct contact with adhesive will irritate eyes
or skin. Read directions on tube carefully. Keep
adhesive out of reach of children.
•
Press the damper onto the flue liner. Allow 24
hours to set before using fireplace.
