2
WARNING
The Seal Tight Chimney Damper is made for use only with open woodburning masonry
fireplace chimneys and are NOT suitable for use in these installations:
•
Don’t use on chimneys serving vented gas logs. Vented gas logs require the
fireplace damper to be removed completely or fixed to a permanently open
position; this is to assure that soot, fumes and carbon monoxide do not enter
your home.
•
Use only on vent-free gas logs if approved by the appliance manufacturer and
the local authority having jurisdiction. However, we don’t recommend it because
the moisture generated from the gas logs could damage the chimney structure.
•
Don’t use on chimneys serving other fuels, wood stoves or other appliances such
as inserts, furnaces, etc.
PROFESSIONAL INSTALLATION RECOMMENDED
Some chimneys are difficult to access. SBI Heating Accessories recommends that you
call your local CSIA or WETT certified chimney sweep to install your new damper and
clean your chimney at the same time. This will not only help with the installation, but will
help ensure that your flue is in good working condition.
SAFETY PRECAUTIONS
As with any product you install, especially on your roof, there are safety precautions,
including:
•
Using a ladder and working on your roof in a safe manner;
•
Working on roof only in good weather, not in rain, ice, snow, or lightning;
•
Making sure the damper will open properly before starting a fire;
•
Using safety glasses when drilling;
•
Using a masonry bit when drilling into masonry;
•
Using only the adhesive provided.
In addition, be sure to check local codes and the appliance manufacturer before
installing on flues venting gas fireplaces or gas appliances.
TOOLS NEEDED FOR INSTALLATION
Hammer, power drill, 1/4” masonry drill bit, safety glasses, wire cutters, and ladder.
