SBC SBC373, Руководство пользователя

Страница: 12 / 59

11
LCD DISPLAY
Backlit LCD Display
Both the handset and the base unit have the backlit LCD display. It will light when you
start using the handset or the base unit, or when a call is received. The display light will
stay on for a few seconds after pressing a button or lifting the handset off the base unit.
Backlit Keypad
The num eric keys will light when you press a key or when a call is received. The light
will stay on for a few seconds after pressing a key or answering a call.
DATA PORT
You can connect a comm unication device (like
computer, m odem , fax m achine, answering
m achine, and etc) through this unit using the
DATA jacks at the bottom of the base unit.
You could choose to connect the comm unication
device to Line 1 or Line 2 with the jacks labeled
“L1 Data” or “L2 Data” respectively. However, if
you have 2 telephone lines occupied the jacks
“L1 only” and “L2 only”. Then your comm unication device can only be connected to
Line 1 via the jack labeled “L1 & L2”. SEE PAGE 16 FOR DETIALS OF TELEPHONE
LINE(S) CONNECTION
Note: Make sure the data device is not in use prior to using your phone or else the data
device may not be operated properly. W hile data transm ission is in progress, use of the
same line on your SBC373 or a Call W aiting ID alert m ay interrupt the transm ission.
Caller’s Nam e
Caller’s Num ber
Calling Date
& Tim e
Sequence in caller list
Labels of 5 softkeys
I MP OR TAN T IN FOR MAT ION