21
Operating instructions for the user - Figure
5
1
For your safety
CAUTION - Damages of device:
Do not pour water on the sauna control or clean it
with a very wet cloth.
For cleaning please use a cleaning cloth, which has
been slightly moistened with a mild soapy solvent
(dish detergent).
WARNING - Fire hazard:
Prior to turning on the sauna control and
when selecting the start-time (time until the
stove starts) make sure that no combustib-
le objects have been placed on top of the
stove.
2
Turning the sauna interior li-
ghting on / off
1. Key
1
turns sauna interior lighting ON / OFF.
3
Operation
3.1
Operation without selected time
1. Press ON / OFF
2
key
The display
4
indicates 00.00 (Display blinks)
The signal lamp
5
OPERATION lights up.
2. Press START / STOP
8
key.
The sauna heater starts.
The signal lamp
3
HEATING lights up.
The temperature measured in the area of the
temperature sensor appears in the display
4
.
3. Set the desired temperature with the rotary
knob TEMPERATURE
6
in the range of
50 - 125 degrees Celsius.
4. To exit:
4.1 Press START / STOP
8
key.
The sauna heater turns off.
The display indicates 00.00 (Display blinks)
The signal lamp
3
HEATING goes out.
The control is ready for entering a selected
time or a restart.
4.2 Press ON / OFF
2
key.
The sauna control is turned off.
3.2
Operation with selected time
1. Press ON / OFF
2
key
The display
4
indicates 00.00 (Display blinks)
The signal lamp
5
OPERATION lights up.
NOTE - "High-Speed Run:
Pressing and holding the PLUS / MINUS keys
7
trig-
ger a high-speed run entry after 5 seconds.
www.ssb-berlin.de
Schwimmbad- und Saunatechnik Berlin - Versandhandel
Kornblumenstraße 22 - D-29725 Emden - Tel.-Nr.: 04921 - 450 99 88 - Fax: 04921 - 450 99 95
Internet: www.ssb-berlin.de - eMail: [email protected]
