
22
Operating instructions for the user - Figure
5
4
Turning on / off the control and
the interior lighting
4.1
Turning on the control
WARNING - Fire hazard:
Prior to turning on the sauna control and
when selecting the start-time (time until the
stove starts) make sure that no combustib-
le objects have been placed on top of the
stove.
1. Turn on the control with the ON / OFF key
1
.
A self-test follows:
Briefly the signal lamp
5
lights up.
A buzzer will beep once.
The display
4
flashes:
00.00
The control is ready-to-operate.
4.2
Turning off the control
1. After your sauna bath press the ON / OFF key
1
.
The signal lamp
5
will go out.
The control has been turned off.
4.3
Turning the sauna interior lighting on / off
1. Key
3
turns sauna interior lighting ON / OFF.
5
Quick-Start
5.1
Turning on the control
Turn on the control according to chapter 4.1.
5.2
Adjusting and starting the control
1. Set the desired temperature using the knob
6
.
Note (with a pencil mark) the temperature most
agreeable to you.
2. Briefly press time key
2
(less than 2 seconds)
The heater starts.
The signal lamp
5
is lit constantly.
If the cabin temperature measured is less than the
desired temperature set, the stove will be respond.
The stove will heat.
If the cabin temperature measured is greater than
the desired temperature set, the stove will not be
respond.
5.3
Turning off the control
Turn off the control according to chapter 4.2.