for technicians:
•
Wiring and repairs must be done by a certified electrician.
•
Follow the Minimum Safety Distances when mounting the heater (See page 9).
•
The electronic sensor and electronic heating system should be mounted in a way
so that incoming air will not interfere with it. If using separate control, the control
unit and control panel must be mounted outside the sauna cabin.
•
If this sauna heater is used for public saunas or saunas that may be switched on
by a separate remote-control system, the door of the sauna room must be fitted
with an interlock such that the stand-by mode setting for remote operation is
disabled if the sauna door is opened when the stand-by mode setting for remote
operation is set.
•
Observe the specifications on volumes of the sauna cabin (See page
34).
•
Observe the specifications on ventilation of the sauna cabin (See page
23).
ENGLISH
7
