9
Figure 18
Figure 19
12. INSTALLING THE LIGHT
KIT
NOTE:
Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box.
Step 1.
Remove the 3 screws from the
mounting plate.
Step 2.
Raise and hold the light kit close to
the mounting plate and proceed to do the
wire connections. Connect the white wire
connectors from the light kit and fan,
follow the same procedure with the black
wire connectors. (Fig. 18)
Step 3.
Install the light kit onto the
mounting plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 18)
13. INSTALLING THE LIGHT
BULB & GLASS SHADE
1. Install 1 x 100W (MAX.) halogen bulb
(included).
2.Raise glass shade up against the
mounting plate and secure it to fan by
turning glass clockwise until snug. Do not
overtighten. (Fig. 19)
3. Restore power and your light kit is ready
for operation.
Mounting kit
Light kit
Screws
Connection
plugs
Bulb
Glass shade