6
Step 3.
(Figure 12) Receiver to House
Supply Wires Electrical Connections:
Connect the black (hot) wire from the ceiling
to the black wire marked "AC in L" from
the receiver. Connect the white(neutral) wire
from the ceiling to the white wire marked
"AC in N" from the Receiver. Secure the wire
connections with the plastic wire nuts
provided.
Step 4.
(Figure 12) If your outlet box has a
ground wire (green or bare copper) connect
it to the fan ground wires; otherwise connect
the hanging bracket ground wire to the
mounting bracket. Secure the wire
connection with a plastic nut provided. After
connecting the wires, spread them apart so
that the green and white wires are on one
side of the outlet box and black and blue
wires are on the other side. Carefully tuck the
wire connections up into the outlet box.
Note:
Fan must be installed at a maximum
distance of 30 feet from the transmitting unit
for proper signal transmission between the
transmitting unit and the fan's receiving unit.
8. FINISHING THE
INSTALLATION
Step 1.
Tuck connections neatly into ceiling
outlet box.
Step 2.
Slide the canopy up to hanger
bracket and place the key hole on the
canopy over the screw on the hanger
bracket, turn canopy until it locks in place at
the narrow section of the key holes.
Step 3.
Align the circular hole on canopy
with the remaining hole on the hanger
bracket, secure by tightening the two set
screws.
Note:
Adjust the canopy screws as necessary
until the canopy and canopy cover are snug.
(Fig. 13)
Warning:
Make sure tab at bottom of
hanger bracket is properly seated in groove
of hanger ball before attaching canopy to
bracket. Failure to properly seat tab in
groove could cause damage to electrical
wiring.
Figure 12
Figure 13
White (neutral)
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
White ("to motor N")
Ground
(green)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
Outlet box
Black (hot)
Black ("AC IN L")
Black ("to motor L")
Receiver
Blue (for light)
Blue (for light)
Black (motor)
Outlet box
Hanger
bracket
Canopy
Canopy cover
Screws
