9
Figure 18
Figure 19
Figure 20
13. OPERATING
INSTRUCTIONS
Restore power to ceiling fan and test for
proper operation.
A.
HI
,
MED
, and
LOW
buttons:
These three buttons are used to set
the fan speed as follows:
HI
= high speed
Med
= medium speed
Low
= low speed
B.
OFF
button:
This button turns the fan off.
C. button:
This button controls the light. Press
and release the button to turn the
light ON or OFF. Press and hold the
button to set the desired brightness.
The light key has an auto-resume, it
will stay at the same brightness as the
last time it was turned off.
The Reverse switch is located on the
top of the motor housing. Slide the
switch to the Left for warm weather
operation. Slide the switch to the Right
for cool weather operation.
Speed settings for warm or cool weather
depend on factors such as the room size.
Ceiling height, number of fans and so on.
NOTE:
Wait for fan to stop before
changing the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as
shown in Fig. 19. This allows you to set
your air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward
airflow moves warm air off the ceiling
area as shown in Fig. 20. This allows you
to set your heating unit on a cooler
setting without affecting your comfort.
LOW
OFF
HI
MED
