9
11. INSTALLING THE LIGHT
BULBS & GLASS SHADE
1. Install 2 x 13W compact fluorescent
bulbs (provided). (Fig. 19)
2. Remove the decorative nut, glass cap and
metal nut from the light kit. Place glass
shade over the light kit stem, secure with
the metal nut (rubber side on the top)glass
cap and decorative nut. Do not overtighten.
Secure tightly the glass frame and
decorative nut. (Fig. 19)
3. Insert the 2 pull chain through the eyelet
in the shade and cap. (Fig. 19)
4. Restore power and your light kit is ready
for operation.
NOTE:
Make sure to leave enough space
between the fan pull chain and the bulbs so
the chain doesn't rub against any of the
bulbs.
12. FAN WITHOUT LIGHT
KIT
(OPTIONAL)
1. Disassemble the switch housing from
the light kit by removing nut and washer
on the center of switch housing, you can
keep the light kit for future use.
2. Attach the plastic plug to the switch
housing. (Fig. 20)
3. Install the switch housing to the
mounting plate with screws provided. (Fig.
20)
Figure 19
Figure 20
Bulbs
Pull Chain
Light Kit
Glass Shade
Decorative Nut
Glass Cap
Metal Nut
Mounting plate
Switch housing
Plastic plug
Screws
