8
9. ATTACHING THE FAN
BLADES
Caution:
Remove 5 rubber packing mounts
and discard before installation.
Step 1.
Attach the blade to the blade
bracket using the screws and fiber washers
as shown in Figure 17. Start screw into
bracket. Repeat for the two remaining
screws.
Step 2.
Tighten each screw. Make sure the
blade is straight.
Step 3.
Fasten blade assembly to motor
using the screws supplied. (Fig. 17)
10. INSTALLING THE LIGHT
KIT
NOTE:
Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at fuse
box.
Step 1. Remove the 3 screws from the
mounting plate.
Step 2. While holding the light kit under your
fan, snap together the wire connection plugs.
(Fig. 18)
Step 3. Install the light kit onto the
mountimg plate with 3 screws provided.
Be sure to tighten all screws. (Fig. 18)
Figure 17
Figure 18
Screws
Blade
Blades bracket
Screws
Fiber
washers
Mounting plate
Connection plugs
Light Kit
Assembly
Screws
