8
Figure 16
11. INSTALLING THE LED
LIGHT KIT & GLASS
SHADE
NOTE:
Before starting installation, disco-
nect the power by turning off the circuit
breaker or removing the fuse at fuse box.
Turning power off using the fan switch is
not sufficient to prevent electric shock.
Step 1.
Remove the 1 of 3 screws from the
posts of the mounting plate and keep it for
future use. Loosen the other 2 screws. (Do
not remove) (Fig. 16)
Step 2.
While holding the LED light kit
under your fan, make the polarized plug
connections:
- Red to white
- Black to black
Step 3.
Place the key holes in the LED light
kit over the two screws previously loosened
from the mounting plate. Turn the LED light
kit until the LED light kit locks in place at the
narrow section of the key holes. (Fig. 16)
Step 4.
Securely tighten the two light kit
mounting screws previously loosened and
the one previously removed. (Fig. 16)
Step 5.
Raise glass shade up against the LED
light kit, and secure it to fan by turning glass
clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 16)
NOTE:
The switch cup cover included with
your fan is an option to replace the glass for
the light in the event that you prefer not to
use the light feature of your fan. The switch
cup cover is not necessary for the light
operation; it can be saved for later use if
desired.
12. INSTALLING THE
BATTERY
Insert the 3 volt battery (included) and
make sure they are seated correctly in
each recess with the Po sign facing
up. (Fig. 17)
Figure 17
ON
ECE
1234
LED Light kit
Screws
Mounting
Plate
Connection
plugs
Glass shade
or optional
switch cup
cover
