7
Figure 14
Figure 15
10. INSTALLATING THE
MOUNTING PLATE
Step 1.
Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
Step 2.
Place the key holes on the
mounting plate over the 2 screws
previously loosened from the mounting
ring, turn mounting plate until it locks in
place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one
previously removed. (Fig. 15)
9. ATTACHING THE FAN
BLADES
Step 1.
Insert the blade through the slot in
the housing. Align the holes in the blade
and the fan motor assembly and secure
with a the screw and fiber washer. (Fig. 14)
Mounting ring
Mounting
plate
Screws
Blade
Fiber washers
Screws
Slot
