Savo NOPPA, Инструкция по эксплуатации

Страница: 10 / 24

EN
1
10
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch
having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance)
being sure that the connector of the feeding cable is cor-
rectly inserted in the socket placed on the side of the fan.
Chimney Assembly
• Fasten the Chimney fixing element 19 to the Body using
4 screws 12c .
Upper chimney
• Open the two side pieces out slightly, hook them up be-
hind the brackets 7.2.1 and bring them back together
again until they are in contact.
• Fix to the Brackets at the sides, using 4 screws 12c (2.9 x
9.5) provided.
• If there are any, make sure that the Connector extensions
outlet is in correspondence with the Chimney openings.
Lower chimney
• Open the two side pieces of the Chimney out slightly,
hook them between the upper chimney and the wall, and
then close them together again until they are in contact.
• Fix the part at the sides to the Chimney fixing element
19 , using 2 screws 12c (2.9 x 9.5) provided.