5
Installation
Connect inlet assembly to your pump or
Skimmerfilter using flexible hose and hose
clamp (provided).
Place Filter into hole and level front to
back and side to side. Tip the unit forward
(toward the pond) slightly (about 1/4”) to
compensate for settling.
Pull pond liner up and over front of filter.
Wipe the liner so that it is free of dirt and
smooth wrinkles.
Align faceplate spillway to front of hous-
ing. Press screws through liner. Tighten
firmly by hand.
Working from inside the filter, carefully
cut liner from spillway opening with sharp
utility knife.
Place grate into unit and back fill around
unit using pea gravel or soil that is free of
clumps. Hand pack every 2-3 inches.
