Assembly and Installation
3
4
5
6
2
At the top of the waterfall, prepare the
area for installation by excavating a 9”
x 34” x 6” deep hole. Compact the soil
in the bottom of the hole to prevent
unwanted settling.
The Livingponds
®
Filter 070 includes
two 3” inlets (on either side of the
housing). Select the unused side
and apply glue to the ABS plug
(provided).
Before glue dries, firmly press plug
into unused Livingponds® Filter inlet.
For
1 1/2” or 2”
kink free hose
,
wrap the inlet
barb's threads with included teflon tape and
screw
into reducer bushing provided. Rigid
or flexible PVC can be glued directly to filter
inlet or reducer bushing.
Install inlet assembly by first applying
a layer of PVC glue to the outside of
the reducer bushing.
Before glue dries, firmly press inlet
assembly into Livingponds® Filter
inlet.
1
34”
9”
6”
2
3
Operating Capacities
operating manual
•
bio comb
media
• Livingponds
®
Filter 070 housing • filter mat (2) • mesh bag • faceplate spillway 16”
• faceplate screws • reducer bushing
•
media grate
• plug • hose clamp
• phillips screwdriver • rigid or flexible PVC tubing • PVC glue • shovel • hand level
mesh
media
bag
(x2)
#RF0
20
filter mat (x2)
#RF025
Livingponds
®
Filter
F
070 housing
#RF022
faceplate spillway 16”
#RF028
faceplate screws
#RF026
SAViO’s Livingponds® Filter 070 allows you to quickly add bio-mechanical filtration and the visual splendor of a cascading
waterfall to any pond or water feature. Two medium density filter pads and ceramic bio media keep your pond clean &
healthy. Install in concrete or liner ponds - no silicone glue is required. Recommended for pump flows up to 3,000gph.
media grate
#RF023
bio comb BC-1F fluidized bio media
media
#RF03
5
inlet plug 3”
#RF024
inlet adapt
e
r
COMPONENTS
TOOLS
3”x 2” reducer
bushing
•
teflon tape
