Savch S2800 Series, Руководство пользователя

Страница: 46 / 112

Note:When the analog quantity AV12 / ACI selects the of 0~20mA current input ,
corresponding voltage of 20mA is 5V. The 100.0% set by analog quantity input
corresponds to the maximum frequency (00-03), and -100.0% the maximum inverted
frequency.
4: Multi-steps speed running setting
The inverter will run in multi-Steps Speed mode if the mode is selected. It is necessary to
set 04 group and 05 group of multi-Steps Speed groups to determine the set percentage
and corresponding relationship of its frequency.
5: PID control setting
The inverter running mode will be course PID control if this parameter selected. It is
necessary to set 10 groups of PID control group. The inverter running frequency value is the
frequency value after PID's action. As for definitions of PID set source, set value and
feedback source and so on, please refer to the introduction of 10 groups of PID function.
6: Remote communication setting
The frequency command is set by upper computer through communication. Please refer to
the 12 communication protocol for details.
7: AVI2/ACI+ setting Remote communication
The frequency command is set by the analog AVI2/ACI and remote communication.
8: Keypad potentiometer(enabled with potentiometer)
43
Acceleration time 1
Setting range 0.1~3600.0[type setting]
00-07
Factory setting
10.00
Used to set the maximum output frequency of inverter. It's the basic of frequency setting
and acceleration and deceleration speed.
Max. output frequency
Setting range 00-04~600.00
00-03
Factory setting
50.00
The upper limitation of inverter output frequency. The value should not be more than the
maximum output frequency.
Upper limitation of running frequency
Setting range 00-05~00-03
00-04 Factory setting 50.00
The lower limitation of inverter output frequency.
When the set frequency value is smaller than the lower frequency limitation, the inverter
runs in lower frequency.
Max. output frequency≥upper frequency limitation ≥lower frequency limitation
Lower limitation of running frequency
Setting range 0.00~00-04
00-05
Factory setting 0.00
When the frequency command selects “keyboard setting”,the function code value is the
initial setting value of inverter frequency.
Keyboard setting frequency
Setting range 0.00~00-03
00-06 Factory setting 50.00