Savch S2800 Series, Руководство пользователя

Страница: 44 / 112

5.DESCRIPTION OF FUNCTIONAL PARAMETERS
All the functional parameters are described in detail in this chapter. According to
attributes, the parameters can be divided into 13 groups; in most of the applica-
tions, presetting for operation shall be completed by performing with these
parameters of groups.
The 13 groups of parameters are listed as below:
0: User’s Parameters
1: Motor Control Parameters
2: Vector Control Parameters
3: V/F Control Parameters
4: Input Terminal Parameters
5: Multi-Step Speed control Parameters
6: Output terminal Parameters
7: Start-stop control Parameters
8: Man-machine interface Parameters
9: Enhanced Function Parameters
10: PID Control Parameters
11: Protection Parameters
12: Serial Communication Parameters
41
indicates that it's available to be set during running.
0 User's Parameters
Select the channel of inverter control command.
The inverter control command includes start, stopping, forward, reverse, jog-on and fault
reset, etc.
0: keyboard command (LOCAL/REMOT light off)
The operation command is controlled by RUN and STOP/RST keys on keyboard panel. If
the multi-function key QUICK/JOG is set as switch function FWD/REV (set 08-03 as 1), the
rotating direction switching is available in this key.
In running state, if press RUN and STOP/RST keys together, the inverter will coast to stop.
1: Terminal command channel (LOCAL/REMOT flickers)
Control the operation command by multi-function inputting terminal forward and reverse,
forward jog running and reverse jog running, etc.
2: Communication command channel (light of LOCAL/REMOT is on)
The operation command is controlled by upper computer through communication mode.
3
:
Reserved
Operation Command Channel
Factory setting
Setting range
0: Keyboard command (LED off)
1: Terminal command (LED flicker)
2: Communication command (LED on)
3: Reserved
0
00-00