RSU2 User Guide
Savari Inc., Confidential
Copyright © Savari, Inc, 2017
Deleting the PCAP Files
6.1.4
Once pcap
files are copied out of StreetWAVE™, it is advisable to delete them from
StreetWAVE™. This helps to conserve disk space on the StreetWAVE™ for further TX Packet
logging.
6.2 Network
configuration
This is used to configure the IP addresses subnet and gateway for Ethernet and Radio1 and
Radio2
IP Address configuration
6.2.1
When a IP address (ipv4/ipv6) is configured / reconfigured for an interface, corresponding
gateway or gateway length should also be updated before committing the change.
6.3 Firewall
configuration
Firewall configuration requires separate rules for IPv4 and IPv6. Configuration files are
separate for IPv4 and IPv6, but the format is same.
6.4 Immediate Forward
StreetWAVE™ Immediate Forward application requires the following two configurations:
The main configuration file containing the UDP configuration.
Incoming stream of messages as specified in
US DOT RSE requirements
UDP streaming configuration is not needed if only one StreetWAVE™ unit is used at a given
intersection.
6.5 Store and Repeat
StreetWAVE™ Store and Repeat application requires the following two configurations:
The main Configuration file contains ActiveDB path and UDP configuration.