RSU2 User Guide
Savari Inc., Confidential
Copyright © Savari, Inc, 2017
IPv4 traffic from TCID to StreetWAVE™.
Incoming IPv4 and IPv6 inter StreetWAVE™ UDP streaming traffic on port 51015: Inter
StreetWAVE™ UDP streaming traffic.
Incoming TCP over IPv6 or IPv4 traffic on eth0 to ports 51012 (ssh, scp) and 8080(web)
of StreetWAVE™: Management access.
Incoming UDP over IPv6 or IPv4 traffic on eth0 to port 3334 of StreetWAVE:
All ICMPv6 and ICMP (v4) packets: StreetWAVE™ learning neighbors and vice versa.
All StreetWAVE™ originated outgoing traffic.
5.3 System
State
StreetWAVE™ is in following two different states when powered on:
Run: All applications (Store and Repeat, DSRC Message Forward, Immediate Forward,
and IPv6) have started up.
Note: The
run
command takes the system to run state.
Standby: All applications (Store and Repeat, DSRC Message Forward, Immediate
Forward, and IPv6) are shut down.
Note: The
Standby
command
takes the system to standby state.
StreetWAVE™ automatically enters to run state after it is powered on. To cycle system state,
please use the
standby
command followed by the
run
command.
Caution: The system should be halted (“halt”) before turning off power. Else, the TX/RX packet
logs and system log files in the “
/nojournal/
” directory might get corrupted.
