sauter nova250, Руководство пользователя

Страница: 22 / 39

nova250 Touch Panel
Standard application
22
7001064003 T1
Sauter Systems
4
4.3.4 Time program for special days
When you press to switch over to the special day time program, you see a window
as shown in Fig. 4-13 (data point without special day time program).
Fig. 4-13: Special Day Time Program
Columns to show the eight special
days.
Time column: indicates the switching time
Value column: shows the value to be set
or the status to be switched
allows you to change the selected
existing time program entry.
allows you to create new time
program entries.
allows you to delete an existing time
program entry.
The list view of the special day time program for all 8 special days is in the upper section
of the window and the graphic view is in the lower section.
Buttons or switch over between the special day time program and the
weekday time program for the relevant data point (also see section 4.3.2).
Press in the time program to prepare for writing the time program to the AS. Before
the time program is sent, you see a confirmation window (see section 4.3.5).
When you press the button (after selecting a line from the list) or the button,
you see the window for making entries in the time program (Fig. 4-12). The procedure
for making entries is the same as for editing or creating a time program entry from the
weekday time program view, as described in section 4.3.3.
Time programs that are defined in this way on the special days can then be released for
specified days using the calendar function (section 4.3.6).