nova250 Touch Panel
Standard application
7001064003 T1
Sauter Systems
21
4
4.3.3
Time program entry
To make a time program entry, there is a window to parameterise the time program
values and switching commands, with the relevant timing, both for the weekdays and the
special days.
Fig. 4-12: Time Program Entry
Weekdays: Monday
to Sunday
Special days:
to
Daily (
): (disables) enables all
weekdays and special days
Time: timing of switching command or
value change
Value: switching status or analogue value
: confirm entry
: cancel entry
Weekdays, Monday
to Sunday
: touch these buttons to enable (
) or disable
(
) the desired weekdays for the switching command or the value change.
Special days (
to
): up to 8 special day time programs can be assigned to this data
point with the help of the calendar function (also see section 4.3.6).
Time: You can set and change the switching time with the slider
or the forwards /
backwards buttons (1-minute steps
, 30-minute steps
).
Value: Touch this box to open the window where you set values or commands. In the
window, you can set the analogue value or switching command and confirm with OK.
The new value or command is shown (also see Fig. 4-2 to Fig. 4-5).
Press
to confirm the new or corrected entry for the time program. The window
with the graphic display appears again.
Press
to cancel the entry and go back to the graphic view without accepting any
changes.
Содержание nova250
Страница 2: ...nova250 Touch Panel 2 7001064003 T1 Sauter Systems ...
Страница 4: ...nova250 Touch Panel Table of Contents 4 7001064003 T1 Sauter Systems 0 ...
Страница 8: ...nova250 Touch Panel Overview 8 7001064003 T1 Sauter Systems 1 ...
Страница 28: ...nova250 Touch Panel Standard application 28 7001064003 T1 Sauter Systems 4 ...
