45.016/4
LRA4
**
Sauter Components
Overview of display and sensor buttons
1 General information such as battery status, energy-saving mode, alarms for dew point and window
contacts, radio connection, general alarm, locking, weekdays for time programme
2 Temperature setpoint and actual value, time, time programme, indoor, outdoor and floor temperature
3 Auxiliary texts for parameterisation
4 Operating modes
5 Confirm changed values, confirm selection
6 Activate menu mode, select menus and parameters
7 Change setpoints, time, date and other values; select the time programme
8 Function button, can be set using parameter P-10
9 Cancel: leave current parameter or menu
Sensor buttons Description
Activate operation with any sensor button.
Selection button
Activate menu mode.
Select operating mode. Possible operating modes: frost protection, reduced
operation, normal operation, time programme, heating or cooling
Select parameter (menu mode).
Change setpoint.
Save value.
Confirm selection.
Change time.
Cancel.
Addressing.
Test addressing.
Lock/unlock manual operation.
Select function or display directly
Function:
Heating or cooling (party function) has priority over all other functions. Over-
ride is active for the time set here, between 1 hour and 9 hours. On the
display, P appears in front of the actual value.
Function/display:
Depending on the setting selected for parameter P-10, pressing the sensor
button executes one of the following functions:
•
Immediate change-over between heating and cooling, and display of
room temperature.
•
Immediate display of the floor temperature.
•
Immediate display of the outside temperature.
•
Immediate display of the relative humidity (optional).
If a function other than the 'party function' is set using parameter P-10, this
function still becomes active by pressing the sensor button for 5 seconds.
7145016003 01
