C
HANGE THE BLADE
To remove the blade, unscrew the screw, check the blade
support and change all spare parts if they are worn out or
damage.
When reassembling the blade, make sure that the cutting
edges face in the direction of the engine rotation. The blade
screw must be torque to 4.5 K·gm(45Nm) with a dynamometric tool.
C
HANGE AND CLEAN THE SPARK PLUG
•
Once the engine has cooled, remove the spark plug
using the socket spanner supplied.
•
Clean the plug with a wire brush.
•
Using a feeler gauge; set the gap to 0.75 mm.
•
Install the spark plug carefully by hand, to avoid
cross-threading.
•
After the spark plug is seated, tighten with spanner
to compress the washer.
C
LEAN THE AIR FILTER
Unclip the air filter cover and remove the sponge filter element. To avoid objects falling
into the air tank, replace the air filter cover. Wash the filter element in warm soap water,
rinse and allow drying naturally.
W
ARNING
!
N
EVER RUN THE ENGINE WITHOUT THE AIR FILTER ELEMENT INSTALLED
.
S
TORING THE UNIT
After mowing, clean the unit thoroughly. Store the unit in a dry room allow the motor
to cool down beforehand. To reduce storage space, the upper handle can be folded
down, unscrew the wing nuts by approx. 6 revolutions.
