ASSEMBLY
W
HEN ASSEMBLING THIS MACHINE
,
PLEASE FOLLOW THE INSTRUCTIONS FOR ASSEMBLY PRINTED
.
Fit the lower handle on the machine with four bolts as per below three pictures. First,
release bolts, and then fit the lower handle on the brackets, last ensure bolts that it does
tighten enough. Note the bolts should be fixed as below photo and on both sides.
Connect the throttle wire and self-propelled wire on Bail arm lever. Take the wire head
into the hole of starting bail arm lever. Follow below pictures to assemble and ensure
the wire won’t be loose.
Fit the upper handle to lower handle. Release two wing nuts on lower handle, as below
picture, and then fit the upper handle on lower handle. Ensure the wing nuts are
tightened enough.
There are 7 working position for each wheel, adjust the handle according to below
picture.
