Saunier Duval ThemaPLUS CONDENS F 30 E Скачать руководство пользователя страница 5

Страница: 5 / 54

must be quoted on all correspondence/

contact made with Saunier Duval.

This guarantee is in addition to your

statutory and other legal rights, which

will not be excluded or diminished by the

return of the guarantee registration card.

5 Appliance use

Saunier Duval’s appliances are

manufactured according to the latest

technical evolutions and current safety

regulations.

This appliance is used to produce

hot water using gas. Any other use

is considered as inappropriate and is

forbidden.

The manufacturer shall not be responsible

for any damage caused by another

use. In that case the user shall be the

responsible.

6 Servicing

Clean the case of the appliance with

wet soapy cloth.
Do not use any abrasive cleaning

product as they could damage the

housing or plastic parts.

7 Recycling

The appliance comprises of many

recyclable parts. The packaging, the

appliance and the content of the package

shall not be thrown together with domestic

waste but disposed of according to the

current regulations.

•

Содержание ThemaPLUS CONDENS F 30 E























































Результаты поиска

Содержание ThemaPLUS CONDENS F 30 E

Отзывы:

Бренды по названию

Популярные бренды

Saunier Duval ThemaPLUS CONDENS F 30 E, Инструкция по использованию, установке и обслуживанию

Результаты поиска

Содержание ThemaPLUS CONDENS F 30 E

Отзывы:

Бренды по названию

Популярные бренды