Saunier Duval ISOFAST F 28 E, Инструкция по установке и эксплуатации

Страница: 8 / 32

8
●
Copper tubing or plastic hep20 may be used for the
domestic hot water system. Unnecessary pressure losses
should be avoided.
●
A flow restrictor limiting the flow through the boiler
to a maximum of 12 l/min is fitted to the boiler.
●
The boiler will operate with a minimum supply
DOMESTIC HOT WATER SYSTEM DESIGN
pressure of 0,7 bar, but under reduced flow rate. Best
operating comfort will be obtained from a supply pres-
sure of 1 bar.
'Hard Water Areas'
In areas where the water is 'hard', more than 200mg/
litre, it is recommended that a proprietary scale reducer
is fitted in the cold water supply to the boiler.
Shy 120
Diagram 6
BOILER SCHEMATIC
1 - Domestic thermistor
2 - Three way valve
3 -
Gas valve
4 - Gas valve ignition module
5 - Heating element
6 - Micro accumulation vessel
7 -
Burner
8 - Ignition electrode
9 - Combustion chamber
1 0 - Micro accumulation vessel thermistor
1 1 - Main heat exchanger
1 2 - Air pressure switch
1 3 - Heating safety valve (3 bar)
1 4 - Electronic control (PCB)
1 5 - Domestic water flow sensor
1 6 - Bypass
1 7 - Domestic heat exchanger
1 8 - Pump
1 9 - Expansion vessel
2 0 - Heating thermistor
2 1 - Overheat safety thermostat
2 2 - Flame sense electrode
2 3 - Fan
2 4 - Domestic safety valve
2 5 - Loss of water sensor
A - Heating return
B - Cold water inlet
C - Heating flow
D - Domestic hot water outlet
E -
G a s
A B C D F
23
2
3
5
4
6
7
8
9
10
1
13
14
18
17
15
16
19
20
22
24
11
12
25
21