å
If you have not assembled the 419600 Credenza,
assemble it now. If you assembled the 419600, then
you will need to remove the Credenza Top by loosening
the TWIST-LOCK® FASTENERS in the Ends and Back as
shown to the right.
å
Now, fi nish drilling out the four holes in the bottom surface
of the 419600 Credenza Top using a 1/4" drill bit.
å
Fasten the 419600 Credenza Top to the ENDS (A and B).
Use four BLACK 2-1/4" FLAT HEAD SCREWS (26S) as
shown below.
Step 7
419600 Credenza
top removal
Loosen eight
TWIST-LOCK®
FASTENERS.
419641
www.sauder.com/services
Page 11
BLACK 2-1/4" FLAT HEAD SCREW
(4 used in this step)
26S
4196
00 C
redenza T
op
A
B
