Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Push twenty-one HIDDEN CAMS (1F) into the ENDS (A
and B), SHELF/BOTTOMS (D), and DRAWER BRACE (M64).
Then, insert the metal end of twelve CAM DOWELS (2F)
into the HIDDEN CAMS, except the long edges of the
ENDS (A and B) and the DRAWER BRACE (M64).
409934
www.sauder.com/services
Page 6
(21 used)
(12 used)
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tighten the HIDDEN CAMS in this step.
A
B
D
D
Do not insert CAM DOWELS into these edges.
Do not insert CAM DOWELS into this part.
Arrow
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
M64
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1618
to watch a video on how to assemble your unit.
