Step 10
409934
www.sauder.com/services
Page 15
E
Printed
information
must be
facing up
.
NAIL
(43 used in this step)
1N
These holes must line up over
the SHELF/BOTTOM (D).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
å
Carefully turn your unit over onto its front edges. Unfold the
BACK (E) and lay it over your unit.
å
Make equal margins along along the two short edges and along
the two long edges of the BACK (E). Push on opposite corners of
your unit if needed to make it "square".
å
Fasten the BACK (E) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
SHELF/BOTTOM (D).
