å
Push two HIDDEN CAMS (3) into the TOP MOLDING (F).
å
Fasten the TOP MOLDING (F) to the ENDS (B and C).
Tighten the HIDDEN CAMS.
å
NOTE: Be sure the follow the diagram to the right on how
to tighten the HIDDEN CAM.
å
NOTE: Be sure the WOOD DOWELS insert into the holes
in the ENDS.
Step 3
B
C
F
3
2
1
3
The arrow must
point toward the
edge of the board.
3
This surface will be
facing out of the part
after it is pushed in the
TOP MOLDING (F).
Page 7
www.sauder.com
420035
The arrow must point
toward the edge of the
board and CAM SCREW.
