Step 14
427719
www.sauder.com/service
Page 19
å
Slide the DRAWER BOTTOM (D729) into the
grooves in the DRAWER SIDES (D32 and D33) and
DRAWER FRONT (L).
D33
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
M63
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
1
3
2
4
å
Pull the DRAWER FRONT BRACKETS (10G) apart and slide
four into the grooves in the DRAWER SIDES (D32 and D33).
You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH"
and "LH" for easy identification.
å
Fasten the DRAWER FRONT (L) to the DRAWER FRONT
BRACKETS (10G). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D32 and D33) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Fasten the DRAWER BRACE (M63) to the DRAWER
FRONT (L). Tighten one HIDDEN CAM.
L
Surface with
HIDDEN CAM
M63
Unfinished sur
face
Hidden part using
recycled material.
Color may vary.
Tap down with your
screwdriver and hammer.
10G
D32
L
Groove
D33
D32
L
D61
D729
D33
D32