Step 7
Page 11
www.sauder.com
423731
å
Unfold the SMALL BACK (Q) and lay it over the bottom of
your unit.
å
Make equal margins along all four edges of the SMALL
BACK (Q). Push on opposite corners of your unit if needed to
make it "square".
å
Fasten the bottom and side edges of the SMALL BACK (Q) to
your unit using the NAILS (6).
å
NOTE: Do not fasten the upper edge of the SMALL BACK at
this time.
å
Repeat this step for the LARGE BACK (P).
å
NOTE: The LARGE BACK (P) will overlap the SMALL BACK (Q).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished
sur
face
P
Q
Unfi
nished
sur
face
Do not fasten NAILS along this
edge until the LARGE BACK (P) is
overlapping the SMALL BACK (Q).
P
Q
G
The LARGE BACK (P) will
overlap the SMALL BACK (Q)
along the SHELF (G).
NAIL
(46 used in this step)
6