Flip the ENDS (A and B) and UPRIGHT (C) over onto their opposite surface.
Turn six BLACK 9/16" FLAT HEAD SCREWS (32S) into the ENDS (A and B ) and UPRIGHT (C) until the shoulder of the
SCREWS rest on the surface of each one.
Slide the LOWER END MOLDINGS (U) onto the ENDS and UPRIGHT. Line up the groove in the MOLDINGS over the head of the
SCREWS in the ENDS and UPRIGHT.
4
4
S
te
p
B
C
A
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Shoulder
These edges
should be even.
These edges
should be even.
These edges
should be even.
BLACK 9/16" FLAT HEAD SCREW
(6 used in this step)
32S
Page 8
www.sauder.com/services
414141
U
U
U
