å
Lay the BACK (X) over your unit.
å
Make equal margins along all four edges of the BACK (X).
Push on opposite corners of your unit if needed to make
it "square".
å
Fasten the BACK (X) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the UPRIGHTS (D).
å
NOTE: Perforations have been provided for access
through the BACK. Carefully cut out the holes needed.
å
Using your hammer, tap four TACK GLIDES (12E) into the
bottom edges of the ENDS (A and B).
Step 9
413852
www.sauder.com/service
Page 13
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished sur
face
These holes must line up
over the UPRIGHTS (D).
NAIL
(30 used in this step)
1N
12E
B
A
X
The perforations
must be here.
