å
Separate the EXTENSION SLIDES (II) from the
EXTENSION RAILS (HH) as shown in the upper diagram
below. Be prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (HH) to the EXTENSON
BLOCKS on the RIGHT END (A) and RIGHT UPRIGHT (C).
Use four GOLD 5/16" FLAT HEAD SCREWS (RRR).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the
hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL out to fi nd the other
hole that lines up with the hole in the END. Turn a SCREW
into this hole.
Step 6
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
RRR
Open end
Push the black lever in and pull the SLIDE from the RAIL.
Open end
A
C
HH
HH
HH
II
408291
www.sauder.com/services
Page 11
Notched edge
Notched edge
