Sauder 394437 Скачать руководство пользователя страница 37

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. 

Carefully read the following chart.

Look out for:

What can happen:

How to avoid the problem:

• Overloaded shelves.
• Improper loading can cause the product 
to be top-heavy.

• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.

• Never exceed the weight limits shown in 
the instructions.
• Work from bottom to top when loading 
shelves. Place the heavier items on the 
lower shelves.

• Improperly moving furniture that is not 
designed and equipped with casters.

• Furniture can tip over or break if 
improperly moved.
• Physical injury. Furniture can be very 
heavy.
• Breakage of tops - particularly with 
double pedestal furniture (drawers at both 
ends).

• Unload shelves from top to bottom before 
moving the unit.
• Do not push furniture, especially on a 
carpeted fl oor. Have a friend help you lift 
the item and set it in place.
• Provide support to the center section of 
the top when lifting the furniture.

• Placing TVs on furniture items that are 
not designed to support a television is 
hazardous.

• Risk of injury or death. TVs can be very 
heavy. Plus the weight and location of the 
picture tube tends to make TVs unbalanced 
and prone to tipping forward.

• This product is not designed to support a 
television.

AVERTISSEMENT

Prière d’utiliser le mobilier à bon escient et avec prudence. Une mauvaise utilisation peut être à l’origine de risques

d’accident ou peut endommager le mobilier et les articles ménagers. 

Lire attentivement le tableau suivant.

À surveiller :

Danger éventuel :

Solution :

• Tablettes surchargées.
• En cas de chargement inadéquat 
l’élément peut être lourd du haut.

• Risque de blessure.
• Du mobilier mal équilibré risque de se 
renverser.
• Des tablettes surchargées risquent de 
casser.

• Ne jamais excéder les limites de poids 
indiquées dans les instructions.
• Pour charger les tablettes, commencer 
par remplir celui du bas pour fi nir par celui 
du haut. Placer les articles plus lourds sur 
les tablettes inférieures.

• Déplacement inadéquat d’un mobilier qui 
n’est pas conçu pour avoir des roulettes et 
n’en est pas équipé.

• Le mobilier risque de se renverser ou de 
casser en cas de déplacement inadéquat.
• Blessure physique. Le mobilier peut être 
très lourd.
• Défaillance des dessus surtout avec les 
éléments de double piédestaux (tiroirs en 
chaque extrémité).

• Décharger les tablettes en commençant 
par celui du haut avant de déplacer 
l’élément.
• Ne pas pousser le meuble, surtout sur 
la moquette. Se faire aider par une autre 
personne pour soulever l'élément et le 
mettre en place.
• Supporter la section centrale du dessus 
lorsque l’on soulève le meuble.

• Il est dangereux de placer des téléviseurs 
sur des meubles que ne sont pas prévus à 
cet eff et.

• Risque de blessures graves, voire mortelles. 
Les téléviseurs peuvent être particulièrement 
lourds. De plus, le poids et l’emplacement 
du tube image ont tendance à rendre les 
téléviseurs instables et enclins à tomber vers 
l’avant.

• Ce produit n’est pas destiné à supporter 
un téléviseur.

419959

www.sauder.com/services

Page 37

Содержание 394437









































Отзывы: