Step 12
419959
www.sauder.com/services
Page 16
å
IMPORTANT: If you purchased the 419958 Hutch, fi nish drilling through the
four holes shown in the TOP (V) before fastening the UPRIGHTS (L and M).
å
NOTE: You will need someone's help in this step.
å
First, fi ll the holes in the LEGS (H, P, Q, and T) 1/4 to 1/2 full with GLUE (54M).
Then, insert four WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
å
Now, fi ll the exact four holes shown in the TOP (V) 1/4 to 1/2 full with
GLUE (54M).
å
Fasten the UPRIGHTS (L and M) to the TOP (V). Tighten four TWIST-LOCK®
FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the TOP. Wipe
away the excess GLUE.
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi
cult.
Caution
!
L
M
P
H
V
54M
15F
(4 used)
Sur
face without
HIDDEN CAMS
The large hole
in the TOP (V)
should be here.
T
Q
Sur
face with
HIDDEN CAMS
If you purchased the
419958 Hutch, fi nish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
If you purchased the
419958 Hutch, fi nish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
Electric drill
with 3/16" bit
Meet Part (V). This component has been
engineered to be lighter, stronger, faster…
well ok. Not technically faster. But defi nitely
makes for a sturdier Credenza that’s easier to
assemble and friendlier to the environment.
