- 15 -
CLEAN THE HEPA AIR OUTLET FILTER
1.
Press to open the air outlet cover.
2.
Take out the Hepa air outlet filter.
3.
Clean the Hepa air outlet filter. Rinse it under cold running water. Dry it thoroughly before placing it back.
4.
Put back the air outlet cover after the filter is placed back.
Please note:
The Hepa filter in the cleaner will became dusty over time. This is normal and will not affect the performance of
the filter. If the Hepa filter is so dusty that suction does not return to 100%, we suggest that the filter be removed
then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some high temperature
objects before refitting into the vacuum. This should be done at least every six months or when suction appears
to be reduced obviously.
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and
could become damaged.
If the suction power of the vacuum cleaner gets low please check the hose for obstacles. You can open the hose
by pressing the square part on the hose handle. Take apart the two parts and remove any obstacles. To assemble
the hose again first press the flexible hose into the handle and then click in the connection part.
Hepa air outlet filter
Press
Air outlet cover
