10
brilliance
jubilee
Open the cable
compartment.
Remove the cable
and plug the cable
in the power socket.
Turn the heater
switch (D) to 0%
1
2
3
Operation
ATTENTION - The surfaces treated with the steamer have
to be steam and heat resistant. Test the colour fastness in a
hidden corner (excluding: carpets & upholstery). Do not clean
cold surfaces; the sudden rise in temperature can damage the
surface.
Before filling water into the unit always release the remaining
steam in the boiler. The pressure can remain in the boiler for days.
Water filling
Switch off the unit
by pressing the ON/
OFF button (F), the
orange light will turn
off, then unplug the
unit from the mains
power supply.
The patented tank
closure (filler cap)
(A) can only be
unscrewed when
the pressure in the
boiler is below 0.5
bar. Carefully turn
the cap in an anti
clockwise direction.
If steam releases,
do not unscrew the
cap any further. Turn
the cap clockwise
to seal the tank,
then repeat step 2
to 5.
Fill the unit with
water using the filling
bottle (O). Three filling
bottles will fill the
tank to its maximum
capacity. Use warm
water to reduce the
heating time. Close
the patented tank
closure (A) carefully
by screwing the cap
clockwise
5
6
7
Press the switches on
the control handle •
and • •(L) ; move the
handle away from you
and press the safety
switch (M) under
the handle to let out
steam.
4
