Gas Range Manual
Page 16
Revision: 21 Oct 2011
3. Take off the lower panel, press the yellow button of the safety valve for 15
to 30 seconds. Stick the flame gun through an opening to light up the
pilot (located at about 50 mm behind the opening). Wait for 5 to 10
seconds before releasing your finger on the black button. Repeat the
above process again if the pilot flame does not stay by now.
4. When the pilot flame is lit, turn the thermostat to the desired temperature
(250 – 500
o
F). You can observe the flame of the oven burner from an
opening behind the lower panel. You may replace the lower panel now.
5. To turn off the oven, rotate the thermostat clockwise to “OFF” position.
The oven burner should go out immediately. A 5 minute complete shutoff
period should be allowed before the appliance is relighted.
6. It need to wait for 5 minutes before the appliance is re-lighted.
Adjustment of main burners
Proper flame setting of main burners is obtained by loosening set screw on air
shutters and to proceed as follows:
Air shutters should first be opened all the way for a sharp blue flame, then
slowly close until the flames turns soft with just a minimum of yellow at the tips.
