Getting to Know Your ASTRA
18
Headlamp Beam Changer
• To change the headlamps from low
to high beam, push the multifunction
lever toward the instrument panel.
Push the lever again or pull it toward
you to return to the low-beam
headlamps.
• To flash the high-beam headlamps,
pull the multifunction lever toward you
momentarily.
Cruise Control
Setting Cruise Control
1. Press and hold the
(On/Off)
button on the back end of the lever
for two seconds to turn on cruise
control. “CC On” will appear on the
odometer display when the button is
released.
2. When traveling at the desired speed,
press the
(Set/Accelerate) button
on the end of the lever. The
(Cruise Control) symbol will illuminate
in the instrument panel cluster.
Adjust or Cancel Cruise Control
• To decrease the set speed, press the
(Resume/Coast) button.
• To increase the set speed, press the
(Set/Accelerate) button.
• To cancel cruise control, step lightly
on the brake pedal or clutch pedal
(if equipped) or press the
(On/Off)
button momentarily. The set speed
will remain in memory.
• To resume the set speed, press the
(Resume/Coast) button.
• To turn off cruise control, press and
hold the
(On/Off) button on the
back end of the lever for two sec-
onds. “CC Off” will appear on the
odometer display.
See Section 4 of your Owner Manual.
Rainsense™ Wipers and
Washers
The Rainsense windshield wipers use
a moisture sensor on the windshield to
detect moisture, such as rain, snow
or dew. The system will automatically
activate the wipers and increase or
decrease wiper speed based on the
amount of moisture on the windshield.
To operate the wipers and washers, use
the lever located on the right side of the
steering column. After activation, the
lever will return to the starting position.
It will not remain in an up or down
position.