SATORI ST1600, Начало работы

Страница: 22 / 24

Safety
Safely handling the Resin Tank
▪ Take care removing the resin tank. Make sure the resin does not spill from the resin tank.
▪ Make sure to not go above the max line labelled on the resin tank to avoid spillages.
Disposal of Resin
▪
To dispose of resin, it must cure first. Leave it in sunlight in a clear container or bag till solid.
It can then be thrown into general waste.
Inspection of the Resin Tank safety
▪
Once the resin tank is cleaned, look closely at the film, making sure no holes, marks,
scratches are going to affect the next print.
▪
If the resin tank leaking, immediately move it away from the printer and check if can be fixed
by tightening the screws it’s underside. The film of the resin tank will degrade over time due
to wear and tear requiring it’s replacement periodically.
Supervise young or inexperienced users to ensure successful prints and safe operation.
Read & understand this guide and it’s safety instructions before using the Satori ST1600,
Failure to do so can result in serious health issues.
In this document are several warning symbols. Take notice of these risks, failure to
do so can result in injury.
!
!
19 | page
Safety warnings