SATORI ST1600, Начало работы

Страница: 15 / 24

Post curing
▪ Models require additional curing to reach final material
strength. Our curing station rotates the part and cures
all angles with UV LEDs within 15 minutes.
▪ Most resins can be cured in sunlight but the
sub-optimal wavelength can cause discolouration.
This takes roughly an hour.
Removing Supports
▪ Light support structure can be removed by hand for
most resins. Simply apply pressure to the tip of the
supports. Otherwise use the support clippers.
▪ Medium supports, heavy supports and mixed support
structure require the support clippers provided in the
toolkit to remove from the model.
www.satori-tech.io
12 | page
Once cleaned, the model needs to be dried before curing.
A fan can be used to speed up this process.
D
E
F
Wear eye protection when using
clippers to remove supports.
!